Bogandilla Wind Farm

Wind · RES Australia Pty Ltd · Wind Turbine - Onshore

Publicly Announced Wind - Wind NEM data · 24 hours
530 MW
Registered nameplate capacity
Est. SRMC
$0.50/MWh

Stats window 29 May 2026 04:00 → 30 May 2026 04:00 AEST

Key information
Capacity
530 MW
Status Publicly Announced
Lifecycle Pre-operating
DUID
Owner RES Australia Pty Ltd
Commissioned
Expected closure
Closure date
Technology Wind Turbine - Onshore
Fuel Wind - Wind
Turbine OEM
Turbine model

Dispatch & revenue

29 May 2026 04:00 → 30 May 2026 04:00 AEST

No DUID specified. Open this page from the stats list or a generator profile.

Financial overview

2026 real AUD. Monetary values are CPI-adjusted to 2026 real Australian dollars. Greenfield capex uses AEMO benchmarks when plant-specific cost is unknown.
Type
Wind (onshore)
Capacity
530 MW
Revenue (× MLF) (stats)
See dispatch stats link above
Est. SRMC
$0.50/MWh
Capex total (greenfield)
$1,740.39M

Source value
$1,651.00M (2024 nominal)

How this was derived
Capex_total_aud computed as (benchmark capex_per_mw_aud × 530 MW) using a wind-onshore benchmark figure from the AEMO/CSIRO ETC review; needs re-check against the exact wind-onshore table.

Reference
2024 Energy Technology Cost and Parameters Review (Aurecon for AEMO) (low confidence)

Capex refurbishment
Capex / MW
$3,283,755

Source value
$3.11M (2024 nominal)

Capex / MWh storage
Fixed OPEX (annual)
Fixed OPEX / MW-yr default
$55,000
Variable OPEX / MWh default
$0.50
Fuel cost / GJ
Heat rate GJ/MWh

Confidence: low · Status: ai estimated · Capex basis: estimated · AI checked 04 Jun 2026

Notes
Plant-specific capex/opex/fuel data for Bogandilla not retrieved. Used AEMO/CSIRO (Aurecon) ETC review to populate wind-onshore O&M/asset-life if available; however fixed/variable O&M values and onshore CAPEX $/MW extracted were not fully verified in the retrieved excerpts. CAPEX populated using a wind-onshore benchmark from the AEMO/CSIRO ETC report at cost base year 2024 (nominal). Fuel/heat rate set null for wind. Emissions intensity set to 0 by technology default.

Sources